Leisten is one-stop shop capable of providing complete range of spares for your gas power plants.
Our capabilities include:
Engineering, Tooling, Machining and Coatings for manufacture of Gas Turbine blades, nozzles, rotors, spacers and valves Re-engineering and Reverse Engineering Advanced design system is equipped with software.
Hot Gas Path Components
In a gas turbine engine, the combustor or combustion chamber is fed high pressure air by the compression system. The combustor then heats this air at constant pressure. After heating, air passes from the combustor through the nozzle guide vanes to the turbine.
The gas fuel system is designed to deliver gas fuel to the turbine combustion chambers at the proper pressure and flow rates to meet all of the starting, acceleration and loading requirements of gas turbine operation.
Journal bearings provide radial support for the rotating equipment and thrust bearings provide axial positioning for them. Ball and roller bearings are used in some aircraft jet engines. However, all industrial gas turbines use journal bearings.
Our gas turbine extracts energy from a flow of hot gas produced by combustion of gas or fuel oil in a stream of compressed air.Our gas turbines are characterized by their high cost efficiency, availability and flexibility.
As the name suggests, gas turbine engine compressors provide the compression part of the gas turbine engine thermodynamic cycle.
A gasket is a mechanical seal which fills the space between two or more mating surfaces, generally to prevent leakage from or into the joined objects while under compression.
Gaskets allow for “less-than-perfect” mating surfaces on machine parts where they can fill irregularities
Leisten will provide total solution for Miscellaneous items of Gas Turbine Plant like Filter, Vibration Probes, Magnetic Pick-Ups and Gear units etc..